PLANET WSG-404 - Manual (Page 13)

Wireless Subscriber Gateway 13
2. Installation
The followings are instructions for setting up the WSG-404. Refer to the illustration and follow the
simple steps below to quickly install your WSG-404.
2.1 Installation Requirements
Before installing the WSG-404, make sure your network meets the following requirements.
2.1.1 System Requirements
Cable modem or DSL/ADSL modem.
Network cables: Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors.
Subscriber PC installed with Wireless adapter that complied with 802.11b, or 802.11g.
Workstations of subscribers running Windows 95/98/ME, NT4.0, 2000/XP, MAC OS9 or later,
Linux, UNIX or other platform compatible with TCP/IP protocols.
Account generator (Model No.: WSG-ACG4).
2.1.2 ISP Requirements
Verify whether your ISP use fixed or dynamic IP. If it is a fixed IP, be sure to get the IP from your ISP.
For dynamic IP, which is mostly used, the PC will get the IP automatically whenever it hooks up on
the modem.
Dynamic IP
Dynamic IP Setting
Fixed IP
Your fixed IP address for the WSG-404
Your subnet mask for the WSG-404
Your default gateway IP address
Your DNS IP address
PPPoE
Your user name from your ISP
Your password from your ISP