PLANET WSG-404 - Manual (Page 105)

Wireless Subscriber Gateway 105
Privilege MAC Address List
In addition to the IP address, the MAC address of the workstations that need to access the
network without authentication can also be set in this list. PLANET WSG-404 allows 100
privilege MAC addresses at most.
When manually creating the list, enter the MAC address (the format is xx:xx:xx:xx:xx:xx) as well
as the remark (not necessary). These settings will become effective immediately after clicking
Apply .
Note:
Permitting specific MAC addresses to have network access rights without going through standard
authentication process at the Public LAN (LAN1/LAN2) may cause security problems.
3.3.3 Monitor IP Configuration
PLANET WSG-404 will send out a packet periodically to monitor the connection status of the IP
addresses on the list. If the monitored IP address does not respond, the system will send an e-mail
to notify the administrator that such destination is not reachable. After entering the related
information, click
Apply and these settings will become effective immediately. Click Monitor to
check the current status of all the monitored IP. The system provides 40 IP addresses for the
“Monitor IP List” .