PLANET WSG-404 User Manual

Page 24

WSG-404 User Guide

2.3.2 External Network Access

If all the steps are set properly, PLANET WSG-404 can be further connected to the managed
network to experience the controlled network access environment. Firstly, connect an end-user
device to the network at PLANET WSG-404’s LAN1/LAN2 and set to obtain an IP address
automatically. After the network address is obtained at the user end, open an Internet browser and
link to any website. Then, the default logon webpage will appear in the Internet browser.

1. First, connect a user-end device to LAN1/LAN2 port of the PLANET WSG-404, and set the

dynamical access network. After the user end obtains the network address, please open an
Internet browser and the default login webpage will appear on the Internet browser.
Key in the username and password created in the local user account or the on-demand user
account in the interface and then click

Submit

button. Here, we key in the local user account

(e.g.

test@Local

for the username and

test

for the password) to connect the network.

2. Login page appearing means PLANET WSG-404 has been installed and configured

successfully. Now, the user can browse the network or surf the Internet.