PLANET WSG-404 - Manual (Page 117)

Wireless Subscriber Gateway 117
Encryption Function
Enabled/disabled stands for the status of the encryption
function of the wireless port.
Status
Enable/disable stands for status of the DHCP server on the
Wireless port.
WINS IP Address
The WINS server IP on DHCP server. N/A means that it is
not configured.
Start IP Address The start IP address of the DHCP IP range.
End IP address The end IP address of the DHCP IP range.
Wireless
DHCP Server
Lease Time Minutes of the lease time of the IP address.
Mode The mode of the LAN1 & LAN2 port.
MAC Address The MAC address of the LAN1 & LAN2.
IP Address The IP address of the LAN1 & LAN2.
LAN1 & LAN2
Subnet Mask The Subnet Mask of the LAN1 & LAN2.
Status
Enable/disable stands for status of the DHCP server on the
LAN1 & LAN2.
WINS IP Address
The WINS server IP on DHCP server. N/A means that it is
not configured.
Start IP Address The start IP address of the DHCP IP range.
End IP address The end IP address of the DHCP IP range.
LAN1 & LAN2
DHCP Server
Lease Time Minutes of the lease time of the IP address.
Mode The mode of the LAN3 & LAN4.
MAC Address The MAC address of the LAN3 & LAN4.
IP Address The IP address of the LAN3 & LAN4.
LAN3 & LAN4
Subnet Mask The Subnet Mask of the LAN3 & LAN4.
Status
Enable/disable stands for status of the DHCP server on the
LAN3 & LAN4 port
WINS IP Address
The WINS server IP on DHCP server. N/A means that it is
not configured.
Start IP Address The start IP address of the DHCP IP range.
End IP address The end IP Address of the DHCP IP range.
LAN3 & LAN4
DHCP Server
Lease Time Minutes of the lease time of the IP address.