PLANET WSG-404 User Manual

Page 22

WSG-404 User Guide

Step 5(Cont.): Add User

A new user can be added to the local user data base. To add a user here, enter the

Username

(e.g.

test),

Password

(e.g. test) and

MAC

(optional) and assign a policy to this particular user (or use the

default). Upon completing adding a user, more users can be added to this authentication method by
clicking the ADD bottom.
Click

“Next”

to continue.

Step 6: Set Wireless Access-Point Connection
SSID:

Enter a SSID (Up to 32 characters) for the system. The default is

WSG-404

. SSID is a unique

identifier used for the wireless users’ devices to associate with WSG-404.

Transmission Mode:

WSG-404 supports two transmission modes, 802.11b and 802.11(b+g).

Select the appropriate transmission mode to work with the wireless clients in the network.

Channel:

If the default channel used by many other APs, it is necessary to select another channel

form the Channel field for a better performance.
Click

“Next”

to continue.