PLANET WSG-404 User Manual
Page 41
Wireless Subscriber Gateway
41
1.
WEP Key:
W
ired
E
quivalent
P
rivacy. If using this function is desired, please choose
“Enable”
.
2.
WEP Key Encryption
: This is a data privacy mechanism based on a 64-bit or 128-bits
shared key
algorithm
.
3.
Mode:
There are two types of encryption,
HEX
and
ASCII
. After selecting one of them,
please enter the related information in the blanks below.
Advance:
For advance settings in detail, please click the hyperlink
Advance
to go into the
Advance
page.
1.
Authentication Type:
The default value is
Auto
.
When
“Auto”
is selected, it will
auto-detect to authenticate by
Shared Key
type or
Open System
type.
Shared Key
is used
such that both the sender and the recipient share a WEP key for authentication.
Open Key
is that the sender and the recipient do not share a WEP key for authentication. All points on
the network must use the same authentication type.
2.
Transmission Rates:
The default value is
Auto
. The range is from 1 to 54Mbps. The rate of
data transmission should be set depending on the speed of this particular wireless network.
Select from a range of transmission speeds or keep the default setting,
Auto
, to make the
Access Point use the fastest possible data rate automatically.