PLANET WSG-404 User Manual

Page 74

WSG-404 User Guide

Trans Full Name:

When enabled, the ID and postfix will be transferred to the RADIUS server for

authentication. When disabled, only the ID will be transferred to RADIUS server for
authentication.

NASID:

Enter the NASID of the PLANET WSG-404 for the external RADIUS authentication

server.

Server IP:

Enter the IP address/domain name of the RADIUS server.

Authentication Port:

Enter the authentication port of the RADIUS server and the default value

is 1812.

Accounting Port:

Enter the accounting port of the RADIUS server and the default value is

1813.

Secret Key:

Enter the key for encryption and decryption.

Accounting Service:

Select this to enable or disable the

“Accounting Service”

for accounting

capabilities.

Authentication Protocol:

There are two methods, CHAP and PAP for selection.

3.2.1.4 Authentication Method - LDAP

Choose

“LDAP”

in the

Authentication Method

field, the hyperlink beside the pull-down menu will

become

“LDAP Setting”