PLANET ADN-4000 - Manual (Page 98)

Transmit Power: A
security purposes if you wish
djust the transmission range here. This tool can be helpful for
to limit the transmission range.
Multimedia): Select whether WMM is enable or disabled. Before you
disable WMM, you should understand that all QoS queues or traffic classes relate to
ffects.
acket. By default, the
g that an acknowledge
the 802.11e amendment addi anagement functionality to WMM.
options and make the changes take
WMM (Wi-Fi
wireless do not take e
WMM No Acknowledgement: Select whether ACK in WMM p
'Ack Policy' for each access category is set to Disable, meanin
packet is returned for every packet received. This provides a more reliable
transmission but increases traffic load, which decreases performance. To disable the
acknowledgement can be useful for Voice, for example, where speed of transmission
is important and packet loss is tolerable to a certain degree.
WMM APSD: APSD is short for automatic power save delivery, Selecting enable will
make it has very low power consumption. WMM Power Save is an improvement to
ng advanced power m
Click Save/Apply to configure the advanced wireless
effect.
3.5 Diagnostics
Click “Diagnostics” to show the interface.
Your Router is capable of testing your DSL connection. The individual tests are listed below.
If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page to
make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the
troubleshooting procedures.
Figure: Diagnostics page
98