PLANET ADN-4000 - Manual (Page 94)

3
Wireless > Basic, the following page appears.
.4 Wireless
3.4.1 Wireless – Basic
Choose
Enable Wireless: If you want to make wireless be available, you have to check this
t
our
a station cannot obtain the SSID through passive scanning.
Clients Isolation: When many clients connect to the same access point, they can
each other. If you want to disable the access between clients which connect
SSID: For added sec
Channel: ed. This
parameter further specifies example, the channel will
1,
ETSI 1~13, JP
Max Clients: S ions to be enble to link with AP.
Once the client s are refused. The value of
maximum client
Wireless - Guest/V irtual network
able below. In the current
soft
After setting, click
take effect.
box first. Otherwise, the Hide Access Point SSID, Country, Enable Wireless Gues
Network, and Guest SSID boxes are not displayed.
Hide Access Point: Check this box if you want to hide any access point for y
router, so
access
the same access point, you can check this box.
Disable WMM Advertise: WMM is short for wi-fi multimedia, which can provide
high-performance multimedia voice and video data transfers.
urity, you should change the default SSID to a unique name.
The option of the channel with which your gateway is configur
your wireless connection. For
adjust according to nations to adapt to each nation's frequency provision (FCC 1~1
1~14).
pecifies maximum wireless client stat
s exceed the max vlaue, all other client
s is 16.
irtual Access Points: If you want to make Guest/V
function be available, you have to check those boxes in the t
ware version, three virtual access points can be configured.
Save/Apply to save the basic wireless options and make the change
94