PLANET ADN-4000 - Manual (Page 48)

48
3.3.1.3 Add PPPoA Configuration
This section describes the procedure for adding pppoa_0_0_35 (PPPoA mode).
Step 1: You need to open the Layer2 Interface > ATM Interface page to add a PVC for
PPPoA mode. Click Add and the following page appears.
Step 2: Select the DSL link type to PPPoA, the Encapsulation Mode to VC/MUX
(according to the uplink equipment). Click Apply/Save, and the following page
appears.
Step 3: Return to the WAN Service page, and click Add. The following page appears.