PLANET ADN-4000 - Manual (Page 52)

52
Step 4: After proper modifications, click Next, and the following page appears.
Step 5: In this page, you can modify the service description. Click Next, and the following
page appears.
Step 6: In this page, enter information provided to you by your ISP to configure the WAN
IP settings. Click Next, and the following page appears.
In this page, Network Address Translation (NAT) allows you to share one Wide Area
Network (WAN) IP address for multiple computers on your Local Area Network (LAN).
Enable NAT: Select it to enable the NAT function of the modem. If you do not want to
enable NAT, and wish the user of modem to access the Internet normally, you need to add
a route on the uplink equipment. Otherwise, the access to the Internet fails. Normally,
enable the NAT function.