beautypg.com

5 add bridge configuration – PLANET ADN-4000 User Manual

Page 54

background image

54

3.3.1.5 Add Bridge Configuration

In the WAN Service Setup page, click Add to add WAN configuration. This section
describes the procedure for adding br_0_0_32 (Bridge mode).

Step 1: Click Add to turn into the following page. (At first, you must add suitable ATM

configuration for this WAN configuration.) In this page, you can select ATM
Interface.

Step 2: Select an ATM Interface, such as atm1/(0_0_32). Click Next, and the following
page appears.

Step 3: In this page, you can modify the WAN service type, Service Description and

Enable IPv6 for this service. Click Next, and the following page appears.

See also other documents in the category PLANET Communication: