PLANET ADN-4000 - Manual (Page 96)

Network Authentication: Select the authentication mode for the selected wireless
LAN of SSID to be open or shared.
its for 64-bit
A-PSK,WPA2, WPA2 –PSK,
d
u to
articular
he beacon interval for the access point, set XPress mode and set
WEP Encryption: Enable WEP Encryption.
Encryption Strength: Select the desired Data Security level to be 64-bit.
Current Network Key: Select one of network key that you set on the Key boxes as
default one.
Network Key 1 to 4: Enter 5 ASCII characters or 10 hexadecimal dig
tem allows you to type in 4 kinds of encryption keys to fill out WEP keys box. The sys
the WEP key.
The authentication modes are as follows: 802.1X, WPA, WP
Mixed WPA2/WPA, Mixed WPA2/WPA –PSK.
After proper configuration, click Save/Apply to save the wireless security options an
make the modification effect.
3.4.3 Wireless – Advanced
Choose Wireless > Advanced, the following page appears. This page allows yo
configure advanced features of the wireless LAN interface. You can select a p
channel on which to operate, force the transmission rate to a particular speed, set the
fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in
power-save mode, set t
whether short or long preambles are used.
96