PLANET WGSW-50040 - Manual (Page 64)

5-2
5) Clear the list of candidate switches maintained by the switch
4． Configure attributes of the cluster in the candidate switch
1) Set the time interval of keep-alive messages of the cluster
2) Set the max number of lost keep-alive messages that can be tolerated in the cluster
5． Remote cluster network management
1) Remote configuration management
2) Remotely upgrade member switch
3) Reboot member switch
6． Manage cluster network with web
1) Enable http
7． Manage cluster network with snmp
1) Enable snmp server
1. Enable or disable cluster
Command Explanation
Global Mode
cluster run [key <WORD>] [vid <VID>]
no cluster run
Enable or disable cluster function in
the switch.
2. Create a cluster
Command Explanation
Global Mode
cluster ip-pool
no cluster ip-pool
Configure the private IP address pool
for cluster member devices.
cluster commander [<cluster_name>]
no cluster commander
Create or delete a cluster.
cluster member {candidate-sn
| mac-address [id ]}
no cluster member {id |
mac-address <mac-addr>}
Add or remove a member switch.
3. Configure attributes of the cluster in the commander switch
Command Explanation
Global Mode
cluster auto-add
no cluster auto-add
Enable or disable adding newly
discovered candidate switch to the
cluster.
cluster member auto-to-user
Change automatically added
members into manually added ones.
cluster keepalive interval >
no cluster keepalive interval
Set the keep-alive interval of the
cluster.