PLANET WGSW-50040 - Manual (Page 163)

21-20
query-interval <value>
no ip igmp snooping vlan <vlan-id>
query-interval
snooping vlan <vlan-id> query-interval”
command restores the default value.
ip igmp snooping vlan
immediately-leave
no ip igmp snooping vlan
immediately-leave
Enable the IGMP fast leave function for the
specified VLAN: the “no ip igmp snooping
vlan immediate-leave” command
disables the IGMP fast leave function.
ip igmp snooping vlan <vlan-id>
query-mrsp <value>
no ip igmp snooping vlan <vlan-id>
query-mrsp
Configure the maximum query response
period. The “no ip igmp snooping vlan
<vlan-id> query-mrsp” command restores to
the default value.
ip igmp snooping vlan
query-robustness <value>
no ip igmp snooping vlan
query-robustness
Configure the query robustness. The “no ip
igmp snooping vlan
query-robustness” command restores to the
default value.
ip igmp snooping vlan <vlan-id>
suppression-query-time <value>
no ip igmp snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The
“no ip igmp snooping vlan <vlan-id>
suppression-query-time” command restores
to the default value.
ip igmp snooping vlan <vlan-id>
static-group [source
] interface [ethernet |
port-channel]
no ip igmp snooping vlan <vlan-id>
static-group [source
] interface [ethernet |
port-channel]
Configure static-group on specified port of the
VLAN. The no form of the command cancels
this configuration.
ip igmp snooping vlan <vlan-id> report
source-address <A.B.C.D>
no ip igmp snooping vlan <vlan-id>
report source-address
Configure forwarding IGMP packet source
address, the no operation cancels the packet
source address.