PLANET WGSW-50040 - Manual (Page 258)

35-29
logging loghost sequence-number
no logging loghost sequence-number
Add the loghost sequence-number
for the log, the no command does
not include the loghost
sequence-number.
35.7.3 System Log Configuration Example
Example 1:
When managing VLAN the IPv4 address of the switch is 100.100.100.1, and the IPv4 address of the remote
log server is 100.100.100.5. It is required to send the log information with a severity equal to or higher than
warnings to this log server and save in the log record equipment local1.
Configuration procedure:
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)# ip address 100.100.100.1 255.255.255.0
Switch(Config-if-Vlan1)#exit
Switch(config)#logging 100.100.100.5 facility local1 level warnings
Example 2:
When managing VLAN the IPv6 address of the switch is 3ffe:506::1, and the IPv4 address of the remote log
server is 3ffe:506::4. It is required to send the log information with a severity equal to or higher than critical to
this log server and save the log in the record equipment local7.
Configuration procedure
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ipv6 address 3ffe:506::1/64
Switch(Config-if-Vlan1)#exit
Switch(config)#logging 3ffe:506::4 facility local7 level critical