PLANET WGSW-50040 - Manual (Page 182)

24-11
[untagged-802-3]
[no]{deny|permit}{any-source-mac|{host-source-ma
c}|{}}{any-destin
ation-mac|{host-destination-mac}|{
mac>}}[tagged-eth2 [cos
[]] [vlanId []]
[ethertype []]]
Creates an MAC access rule
matching tagged ethernet 2
frame; the “no” form
command deletes this MAC
access rule.
[no]{deny|permit}{any-source-mac|{host-source-ma
c }|{}}
{any-destination-mac|{host-destination-mac
mac>}|{}} [tagged-802-3 [cos
[]] [vlanId
[]]]
Creates an MAC access rule
matching tagged 802.3 frame;
the “no” form command
deletes this MAC access rule.
c. Exit ACL Configuration Mode
Command Explanation
Extended name-based MAC access configure Mode
exit
Quit the extended
name-based MAC access
configure mode.
(8) Configuring a numbered extended MAC-IP access-list
Command Explanation
Global mode
access-list{deny|permit} {any-source-mac|
{host-source-mac } | {
}} {any-destination-mac |
{host-destination-mac } |
{}} icmp {{
} |any-source| {host-source
}} {{
} | any-destination |
{host-destination }}
[ []] [precedence
] [tos ] [time-range
]
Creates a numbered
mac-icmp extended mac-ip
access rule; if the numbered
extended access-list of
specified number does not
exist, then an access-list will
be created using this number.
Note: switch implement the
simple mode of MAC-IP ACL,
configure SrcMac+SrcIP or
DstMac+DstIP simple mode
only.
access-list{deny|permit}{any-source-mac|
{host-source-mac}|{
Creates a numbered
mac-igmp extended mac-ip