PLANET WGSW-50040 - Manual (Page 47)

4-9

Event: A list of all events generated by RMON Agent.
Alarm depends on the implementation of Event. Statistics and History display some current or history subnet
statistics. Alarm and Event provide a method to monitor any integer data change in the network, and provide
some alerts upon abnormal events (sending Trap or record in logs).
4.4.4 SNMP Configuration
4.4.4.1 SNMP Configuration Task List
1. Enable or disable SNMP Agent server function
2. Configure SNMP community string
3. Configure IP address of SNMP management base
4. Configure engine ID
5. Configure user
6. Configure group
7. Configure view
8. Configuring TRAP
9. Enable/Disable RMON
1. Enable or disable SNMP Agent server function
Command Explanation
Global Mode
snmp-server enabled
no snmp-server enabled
Enable the SNMP Agent function on the switch; the
no command disables the SNMP Agent function on
the switch.
2. Configure SNMP community string
Command Explanation
Global Mode
snmp-server community {ro|rw} <string>
[access {|}]
[ipv6-access
{|}] [read
] [write
]
no snmp-server community
[access {|}]
[ipv6-access
{|}]
Configure the community string for the switch; the no
command deletes the configured community string.