PLANET WGSW-50040 - Manual (Page 57)

4-19
ftp-dir
For FTP client, server file list can be
checked. FtpServerUrl format looks like: ftp:
//user: password@IPv4|IPv6 Address.
2. FTP server configuration
（1）Start FTP server
Command Explanation
Global Mode
ftp-server enable
no ftp-server enable
Start FTP server and support IPv4, IPv6, the no
command shuts down FTP server and prevents
FTP user from logging in.
（2）Configure FTP login username and password
Command Explanation
Global Mode
ip ftp username
{nopassword | password {0 | 7}
<password>}
no ip ftp username<username>
Configure FTP login username and password;
this no command will delete the username and
password.
（3）Modify FTP server connection idle time
Command Explanation
Global Mode
ftp-server timeout Set connection idle time.
3. TFTP server configuration
（1）Start TFTP server
Command Explanation
Global Mode
tftp-server enable
no tftp-server enable
Start TFTP server, the no command shuts down
TFTP server and prevents TFTP user from
logging in.
（2）Modify TFTP server connection idle time
Command Explanation