PLANET WGSW-50040 - Manual (Page 162)

21-19
21.3.2 IGMP Snooping Configuration Task List
1. Enable IGMP Snooping
2. Configure IGMP Snooping
1. Enable IGMP Snooping
Command Explanation
Global Mode
ip igmp snooping
no ip igmp snooping
Enables IGMP Snooping. The no operation
disables IGMP Snooping function.
2. Configure IGMP Snooping
Command Explanation
Global Mode
ip igmp snooping vlan
no ip igmp snooping vlan
Enables IGMP Snooping for specified VLAN.
The no operation disables IGMP Snooping for
specified VLAN.
ip igmp snooping vlan < vlan-id > limit
{group <g_limit> | source <s_limit>}
no ip igmp snooping vlan < vlan-id > limit
Configure the max group count of vlan and
the max source count of every group. The “no
ip igmp snooping vlan limit”
command cancels this configuration.
ip igmp snooping vlan <vlan-id>
l2-general-querier
no ip igmp snooping vlan <vlan-id>
l2-general-querier
Set this vlan to layer 2 general querier. It is
recommended to configure a layer 2 general
querier on a segment. The “no ip igmp
snooping vlan <vlan-id>
l2-general-querier”command cancels this
configuration.
ip igmp snooping vlan
l2-general-querier-version
Configure the version number of a general
query from a layer 2 general querier.
ip igmp snooping vlan
l2-general-querier-source
Configure the source address of a general
query from a layer 2 general querier.
ip igmp snooping vlan
mrouter-port interface
no ip igmp snooping vlan
mrouter-port interface
Configure static mrouter port of vlan. The no
form of the command cancels this
configuration.
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> mrpt
Configure this survive time of mrouter port.
The “no ip igmp snooping vlan <vlan-id>
mrpt” command restores the default value.
ip igmp snooping vlan <vlan-id> Configure this query interval. The “no ip igmp