PLANET WGSW-50040 - Manual (Page 227)

29-1
Chapter 29 TACACS+ Configuration
29.1 Introduction to TACACS+
TACACS+ terminal access controller access control protocol is a protocol similar to the radius protocol for
control the terminal access to the network. Three independent functions of Authentication, Authorization,
Accounting are also available in this protocol. Compared with RADIUS, the transmission layer of TACACS+
protocol is adopted with TCP protocol, further with the packet head ( except for standard packet head)
encryption, this protocol is of a more reliable transmission and encryption characteristics, and is more
adapted to security control.
According to the characteristics of the TACACS+ (Version 1.78), we provide TACACS+ authentication function
on the switch, when the user logs, such as telnet, the authentication of user name and password can be
carried out with TACACS+.
29.2 TACACS+ Configuration Task List
1. Configure the TACACS+ authentication key
2. Configure the TACACS+ server
3. Configure the TACACS+ authentication timeout time
4. Configure the IP address of the RADIUS NAS
1. Configure the TACACS+ authentication key
Command Explanation
Global Mode
tacacs-server key
no tacacs-server key
Configure the TACACS+ server key; the
“no tacacs-server key” command deletes
the key.
2. Configure TACACS+ server
Command Explanation
Global Mode
tacacs-server authentication host
[[port {}]
[timeout ] [key ]
[primary]]
no tacacs-server authentication host
Configure the IP address, listening port
number, the value of timeout timer and the
key string of the TACACS+ server; the no
form of this command deletes the
TACACS+ authentication server.