Emerson MPR15 Series - Manual (Page 38)

38 Operation
UM5C06B / C ( 169-2071-500 ) P0711722 Standard 10.00 May 2001
Figure 8 - Power shelf NT5C10BM e/w EQL switch assembly
Figure 9 - Power shelf NT5C10CO equipped with start delay LED
Electrical
When using the MPR25 rectifier, powered from 208 / 240 V AC 50 / 60 Hz
single phase, the power shelf equipped with one, two, or three rectifiers has
the following specifications:
Condition:
Typical input current value for 54 V dc, full load output
= maximum input current at Output 54 V dc, current
limit minimum line
Input Voltage: 208 V AC
Frequency: 47-63 Hz
Range: 176-264 V AC
Input Current: one rectifier 11.7 (15.5)
two rectifiers 23.4 (31.0)
three rectifiers 35.1 (46.5)
Output Voltage: -46 V DC TO –57 V DC
EQL
ON
POS( ) POS( )
FLT
NT5C10K
REL
NO
SER NO
POS( )
DELAYED
MPS
MAIN DELAYED