Emerson MPR15 Series - Manual (Page 13)

13
25A Switch Mode Rectifier  NT5C06B / C Installation and User Manual
About this manual
Purpose of this manual
This manual provides all the necessary information for installing, operating
and maintaining an MPR15 (-48 V/15 A) and MPR25 (-48 V, 25 A) series
(NT5C06B/C) Switch Mode Rectifier, 19-inch and 23-inch Power Shelf
NT5C10 for embedded and system applications, as well as the NT5C13F( )
Low Voltage Disconnect series.
Safety precautions
This equipment meets CSA 22.0 - 0M1982, CSA C22.2 - 107-1957 and
UL1950. High voltages are present inside the unit. Consequently, insulated
tools, eye protection and adequate lighting are required when working on the
unit. The latest drawings must be used.
This equipment contains a number of discrete and micro-electronic solid
state devices subject to permanent damage, caused by electrostatic potentials,
when handling and installing unless appropriate precautions are observed.
How this manual is organized
This manual is divided into nine parts:
• Introduction
• Specifications
• Operation
• Power shelf
• Installation and start-up procedure
• Low voltage disconnect
• Maintenance
• References
• Appendices