PLANET GS-4210-24P2S - Manual (Page 334)

User’s Manual of GS-4210-24P2S
6.3.31 qos Command
Description:
Enable / Disable QoS on the device and enter the QoS mode (advance / basic)
Syntax:
qos
advanced Enable/Disable QoS on the device and enter the QoS mode (advance/basic).
advanced-mode Set the trust mode when the default action is ports-trusted in advanced mode.
aggregate-policer Configure a policer that can be applied to multiple classes within the same policy map. Use the no form of
the command to remove policer.
basic Set system QoS advance mode.
map Configure the QoS maps.
queue Queue configuration
trust Configure the global trust mode . Use the no form to return untrusted state.
6.3.32 radius Command
Description:
RADIUS server information
Syntax:
radius default-config / host
6.3.33 rate-limit Command
Description:
Rate limit configuration of the specified incoming traffic
Syntax:
rate-limit egress / ingress
6.3.34 rmon Command
Description:
RMON information
Syntax:
rmon alarm / event / history
334