PLANET GS-4210-24P2S - Manual (Page 229)

User’s Manual of GS-4210-24P2S
4.9.7 RADIUS Server
This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screens in Figure 4-9-42 ,
Figure 4-9-43 & Figure 4-9-44 appears.
Figure 4-9-42: Radius Server Setting Page Screenshot
The page includes the following fields:
Object Description
 Retries Timeout is the number of seconds, in the range 1 to 10, to wait for a reply from a
RADIUS server before retransmitting the request. Default is 3.
 Timeout for Reply Retransmit is the number of times, in the range 1 to 30, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead. Default is 3.
The Dead Time, which can be set to a number between 0 and 2000 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured. Default is 0.
 Dead Time
The secret key - up to 128 characters long - shared between the RADIUS server
and the switch.
 Key String
Button
: Click to apply changes.
229