PLANET GS-4210-24P2S - Manual (Page 150)

User’s Manual of GS-4210-24P2S
150
4.7.2.3 IGMP Static Group
Multicast filtering can be dynamically configured using IGMP Snooping and IGMP Query messages as described in above
sections. For certain applications that require tighter control, you may need to statically configure a multicast service on the PoE
Managed Switch. First add all the ports attached to participating hosts to a common VLAN, and then assign the multicast service
to that VLAN group.
- Static multicast addresses are never aged out.
- When a multicast address is assigned to an interface in a specific VLAN, the corresponding traffic can only be
forwarded to ports within that VLAN.
The IGMP Static Group configuration screens in Figure 4-7-12 & Figure 4-7-13 appear.
Figure 4-7-12: Add IGMP Static Group Page Screenshot
The page includes the following fields:
Object Description
 VLAN ID Select VLAN ID for this drop down list.
 Group IP Address The IP address for a specific multicast service.
Select port number for this drop down list.  Member Ports
Button
: Click to add IGMP router port entry.