PLANET GS-4210-24P2S User Manual

Page 220

User’s Manual of GS-4210-24P2S



Discard/SNMP/Log/ Shutdown

If Limit + 1 MAC addresses is seen on the port, shut down the port. This implies

that all secured MAC addresses will be removed from the port, and no new will

be learned. Even if the link is physically disconnected and reconnected on the

port (by disconnecting the cable), the port will remain shut down. There are three

ways to re-open the port:

1) Disable and re-enable Limit Control on the port or the switch,

2) Click the Reopen button.

Also appears under SNMP and System log.

 Trap Frequency (sec.)

Allow to input the seconds for trap frequency.

Button

: Click to apply changes.

Figure 4-9-30:

Port Security Status Page Screenshot

220