PLANET GS-4210-24P2S - Manual (Page 25)

User’s Manual of GS-4210-24P2S
Step5: Supply power to the PoE Managed Switch.
Connect one end of the power cable to the PoE Managed Switch.
Connect the power plug of the power cable to a standard wall outlet.
When the PoE Managed Switch receives power, the Power LED should remain solid Green.
2.2.2 Rack Mounting
To install the PoE Managed Switch in a 19-inch standard rack, please follow the instructions described below.
Step1: Place the PoE Managed Switch on a hard flat surface, with the front panel positioned towards the front side.
Step2: Attach the rack-mount bracket to each side of the PoE Managed Switch with supplied screws attached to the package.
Figure 2-1-5 shows how to attach brackets to one side of the PoE Managed Switch.
Figure 2-1-5: Attach Brackets to the PoE Managed Switch
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the PoE Managed Switch, use suitable screws to securely attach the brackets to the
rack , as shown in Figure 2-1-6 .
25