PLANET GS-4210-24P2S - Manual (Page 245)

User’s Manual of GS-4210-24P2S

Range : If you want to filter a specific source port range filter with this ACE,
you can enter a specific source port range value. A field for entering a source
port value appears. The allowed range is 0 to 65535. A frame that hits this
ACE matches this source port value.
 Destination Port Specify the destination port for this ACE.

Any : No specifc destination port is specified (destination port status is
"don't-care").

Single : If you want to filter a specific destination port with this ACE, you can
enter a specific destiantino port value. A field for entering a destiantino port
value appears. The allowed range is 0 to 65535. A frame that hits this ACE
matches this destination port value.

Range : If you want to filter a specific destiantion port range filter with this
ACE, you can enter a specific destiantion port range value. A field for
entering a destination port value appears.
Urg Specify the TCP "Urgent Pointer field significant" (URG) value for this
ACE.

Set : TCP frames where the Urg field is set must be able to match
this entry.

Unset : TCP frames where the Urg field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
Ack Specify the TCP "Acknowledgment field significant" (ACK) value for this
ACE.

Set : TCP frames where the Ack field is set must be able to match
this entry.

Unset : TCP frames where the Ack field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
Psh Specify the TCP "Push Function" (PSH) value for this ACE.

Set : TCP frames where the Psh field is set must be able to match
this entry.

Unset : TCP frames where the Psh field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
 TCP Flags
Rst  Specify the TCP "Reset the connection" (RST) value for this ACE.
Set : TCP frames where the Rst field is set must be able to match
this entry.

Unset : TCP frames where the Rst field is set must not be able to
match this entry.

Don’t Care : Any value is allowed ("don't-care").
245