PLANET GS-4210-24P2S - Manual (Page 22)

User’s Manual of GS-4210-24P2S
■ Reset Button
At the middle of front panel, the reset button is designed for reboot the PoE Managed Switch without turn off and on the
power. The following is the summary table of Reset button function :
Reset Button Pressed and Released Function
> 5 seconds : Factory Default
Reset the PoE Managed Switch to Factory Default
configuration. The PoE Managed Switch will then reboot and
load the default settings as below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
2.1.2 LED Indications
The front panel LEDs indicates instant status of port links, data activity, PoE status and system power; helps monitor and
troubleshoot when needed. Figure 2-1-2 shows the LED indications of the PoE Managed Switch.
LED Indication
Figure 2-1-2: GS-4210-24P2S LED Panel
■ System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
■ 10/100/1000Base-T Interfaces
LED
Color Function
Lights: To indicate the link through that port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blink: To indicate that the switch is actively sending or receiving data over that port.
10/ 100
LNK/ACT Orange
Lights:
Blink:
To indicate the link through that port is successfully established at 10Mbps or
100Mbps.
To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate the port is providing 52V DC in-line power.
PoE In-Use Orange
To indicate the connected device is not a PoE Powered Device (PD) Off:
22