Chapter 4: system administration, 1 high availability properties – Avago Technologies Syncro CS 9271-8i User Manual
Page 56

LSI Corporation
- 56 -
Syncro CS 9271-8i Solution User Guide
October 2013
Chapter 4: System Administration
High Availability Properties
Chapter 4: System Administration
This chapter explains how to perform system administration tasks, such as planned failovers and updates of the
Syncro CS 9271-8i controller firmware.
4.1
High Availability Properties
The following figure shows the high availability properties that MSM displays on the Controller Properties tab for a
Syncro CS 9271-8i controller.
Figure 37 Controller Properties: High Availability Properties
Following is a description of each high availability property:
Topology Type – A descriptor of the HA topology for which the Syncro CS 9271-8i controller is currently
configured (the default is Server Storage Cluster).
Maximum Controller Nodes – The maximum number of concurrent Syncro CS 9271-8i controllers within the HA
domain that the controller supports.
Domain ID – A unique number that identifies the HA domain in which the controller is currently included. This
field has a number if the cluster or peer controller is in active state.
Peer Controller Status – The current state of the peer controller.
Active: The peer controller is present and is participating in the HA domain.
Inactive: The peer controller is missing or has failed.
Incompatible: The peer controller is detected, but it has an incompatibility with the controller.
Incompatibility Details – If the peer controller is incompatible, this field lists the cause of the incompatibility.