Avago Technologies Syncro CS 9271-8i - Manual (Page 17)

LSI Corporation
- 17 -
Syncro CS 9271-8i Solution User Guide
October 2013 Chapter 3: Creating the Cluster
Creating Virtual Drives on the Controller Nodes
3. On the WebBIOS main page, click Configuration Wizard, as shown in the following figure.
Figure 5 WebBIOS Main Page
The first Configuration Wizard window appears.
4. Select Add Configuration and click Next.
5. On the next wizard screen, select Manual Configuration and click Next.
The Drive Group Definition window appears.
6. In the Drives panel on the left, select the first drive, then hold down the Ctrl key and select more drives for the
array, as shown in the following figure.
Figure 6 Selecting Drives