Avago Technologies Syncro CS 9271-8i - Manual (Page 45)

LSI Corporation
- 45 -
Syncro CS 9271-8i Solution User Guide
October 2013 Chapter 3: Creating the Cluster
Creating the Cluster in SuSE Linux Enterprise Server (SLES)
4. Click Finish.
5. After the fields in the following screen display the information, click Generate Auth Key File on Node1 only.
This action creates an authentication key that is written to /etc/corosync/authkey.
To make node2 join the existing cluster, do not generate a new key file. Instead, copy the /etc/corosync/
authkey
from node1 to the node2 manually.
Figure 31 Cluster Setup on Security Tab