Avago Technologies Syncro CS 9271-8i - Manual (Page 22)

LSI Corporation
- 22 -
Syncro CS 9271-8i Solution User Guide
October 2013 Chapter 3: Creating the Cluster
Creating Virtual Drives on the Controller Nodes
The Create Virtual Drive Summary window appears, as shown in the following figure.
Figure 11 Create Virtual Drive Summary
11. Click Finish to complete the VD creation process.
12. Click OK when the Create Virtual Drive - complete message appears.
3.1.3.1 Unsupported Drives
Drives that are used in the Syncro CS 9271-8i solution must selected from the list of approved drives listed on the LSI
web site (see the URL in
Section 1.4, Hardware Compatibility ). If the MegaRAID Storage Manager (MSM) utility finds a
drive that does not meet this requirement, it marks the drive as Unsupported, as shown in the following figure.
Figure 12 Unsupported Drive in MSM