Rugged Cams H.4 - Manual (Page 81)

1) Selecting the Network Setup Menu
In {Additional Setup} mode, select {Network} using the arrow keys.
[Figure 5-14. Network Setup Window]
2) Ethernet
Setup is performed to use a fixed IP in the local area network environment.
From the Network Setup menu, select {Ethernet} using the arrow keys and the Select
button.
Enter the IP address, subnet mask, default gateway, default DNS, and auxiliary DNS using
the arrow keys, numeric buttons, and Select button.
Set and store an Ethernet network using the arrow keys and the Select button.
3) Cable
Setup is executed to use the automatic access ADSL or a dynamic IP.
From the Network Setup menu, select {Cable} using the arrow keys and the
Select button.
Set as Cable Modem DHCP using the arrow keys and the Select button.
4) Alarm
This is set up for mail Alarm Out in case of an event.
To use this feature, the Call or Mail Alarm must be turned ON in {Main Setup} {Recording
Setup}
.
From the Network Setup menu, select {Alarm} using the arrow keys and
the Select button.
Enter the telephone number and mailing addresses using the arrow keys and the Select