Rugged Cams H.4 - Manual (Page 14)

2-2 Installation and Connection
2-2-1 Basic Connection
Connect the CCTV camera, CCTV monitor (or PC monitor), and PS/2 mouse to the DVR as
shown below.
Connected Device DVR Terminal
1 CCTV camera Video input
2 CCTV monitor (or PC monitor) TV (or VGA)
3 Mouse PS/2
Mouse should be connected before powering on DVR.
1. The input video type must be either NTSC or PAL; these two types must not
be used together.
2. Select the input video format (NTSC/PAL) using the Config switch on the rear
side of the product.
3. Select the output monitor type (VGA/TV) using the Config switch on the rear
side of the product.