Rugged Cams H.4 - Manual (Page 43)

Selecting a device causes the directory name based on the initial values for the time and
channel to be displayed and the size of the file to be backed up to be calculated.
The directory name is set up using the backup time. The first 12 digits are determined by the
year/month/date/hour/minute/second for From, and the 12 digits in the middle, by the
year/month/date/hour/minute/second for To. The last 2 digits are determined by the number
of folders in the selected device.
If a device is not selected, the backup time and channel cannot be changed.
Selecting a device enables selecting the backup time as well. As a rule, the From time cannot
be later than the To time, and the To time cannot be earlier than the From time.
Selecting the item to be changed for the year/month/date/hour/minute/second and pressing
the [Select] button will cause the values that can be set up to be displayed in the Scroll Box.
If no channel has been selected, however, the time cannot be changed either.
The time displayed at this time means that t here is data at the corresponding time. If there is no
data, however, the time is not included in the Scroll Box.
Changing the backup time causes the name of the directory to be backed up to be changed
as well.
To select the backup time, channel, or media, select {Menu} Æ {Channel}, {Menu} Æ
{Time} , or {Menu} Æ {Media}.
The channel to be backed up can only be selected if there is data within the selected time.
If the file to be backed up exceeds the free space, its size is displayed in a yellow box in case
the selected device is capable of rerecording and in a red box if not.
If the backup storage device is not formatted, in case the box displaying the
size of the file to be backed up is displayed in yellow, and if backup is
executed by pressing the Copy (Backup) button, a prompt asking whether to
erase the device will appear as shown below. Selecting [YES] causes the
storage medium for the selected device to be erased.
Press the Copy (Backup) button. A prompt asking whether to proceed with the backup or not
will then be displayed.
Select [Yes] to back up the data or [No] to stop the backup. Otherwise, press the [Cancel] button
to return to device selection mode on the backup window.
Select {Yes} to continue the backup.