Rugged Cams H.4 - Manual (Page 54)

(5) Audio
Used to set the recording for the external audio input linked to the system
Select {Recording} {Audio} for the channel using the arrow keys and the Select button.
On the selection window, select whether to record audio or not.
To set all channels at the same time, go to the top of the {Audio} column and press the Select
button.
3) Event
(1)
Motion
This function detects the movement of images. Detection settings include All, Part, and Off. The
default value is Off, however.
„ Full
Detects all movements of images in each channel
Select {Event} Æ {Moti.} (Motion) for the channel using the arrow keys and the Select
button.
On the selection window, select All.
„
Partial
Motion is detected in the user-defined areas of an image only.
Select {Event} Æ {Moti.} (Motion) for the channel using the arrow keys and the Select
button.
On the selection window, select Partial.
The grid will then be displayed on the screen.
Select the area where motions will be detected using the arrow keys and the Select button.
Select the zone and press the [ESC] button.
2) Set the zone using the arrow buttons and press the [Select] button.
„