Rugged Cams H.4 - Manual (Page 70)

Direct
The administrator manages dedicated (or direct) storages. A dedicated (direct) storage stores
data on the hard disk in real time. Five commands can be executed. Depending on the S/W
status, however, some commands cannot be executed.
{NEW}: Returns the status of the selected storage device to New; if this command is executed,
the selected storage device will be moved to the {New} storage device manager
{Online} : Changes the selected storage device in online state
{Offline} : Changes the selected storage device in offline state
{Format} : Formats the selected storage
{Eject} : Separates the selected device completely from the software
Physical states supporting the execution of the commands above include Healthy and Warning.
In fault state, however, no command can be executed.
When removing a device installed in the DVR, USB, or storage connected to
the IEEE1394 port, the user shall execute the {Eject} command.
Backup
The administrator manages backup storages. Backup storages are not used to store data; rather,
they are only used to back up data. The user can execute only the {New} command.
Depending on the storage type, the storage is used only for direct or backup
purposes.
(4) Configuration of the local storage device
{Model}: Model name of the storage device
{Serial}: Serial number of the storage device
{Location}: Physical location of the storage device
{Capacity (T/F)}: Storage device capacity (T: Total; F: Free)
{Status (SW/HW)}: Storage device status (SW: Software; HW: Hardware)
There are three software status types: