Rugged Cams H.4 - Manual (Page 2)

FCC Compliance Statement
Model Name: H.4
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two
conductions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operations.
WARNING
- Unauthorized reproduction of all or part of this manual is strictly prohibited.
- The figures in this manual are for illustration purposes only (may differ from the actual
product).
- The specifications and design of the product are subject to change without prior notice for
purposes of quality improvement.
CAUTIONS
To get the best use out of the product, be sure to read the cautions before using the product.
For safety, please take note of the following:
z Instructions before using the product
1. To prevent electric shock when installing, moving, or opening the DVR and
peripheral devices, connect and disconnect the cables as instructed. All cables
must be connected to grounded power outlets.
2. If the product is installed near a power outlet, make sure it can be unplugged
easily.
3. Do not use the DVR in water or in wet places.
4. Keep the vinyl packing materials used for the DVR or other peripheral devices
out of reach of children (may cause suffocation).
z Installation Environment of the DVR
1. Maintain the following conditions: operating temperature of 0˚C ~ 30˚C;
operating humidity of 10% ~ 80%
2. Install the DVR in a safe place that is free from external vibration.
3. Install the DVR in a well-ventilated place.
4. To protect the hard disk from data loss and breakdown, install the DVR away
from magnetic materials.
5. When using a rack other than the standard one, use a separate table with
sufficient spacing, i.e., 60cm from the floor, 50cm from the ceiling, and 20cm
from the side and back walls and other objects.