Rugged Cams H.4 - Manual (Page 57)

(2) Preset
When an event occurs, the PTZ camera will be preset.
Select {Alarm Out} Æ {PSet} (Preset) for the channel using the arrow keys and the Select
button.
On the selection window, select the event (sensor or sound) and decide whether to generate
an alarm or not using the arrow keys and the Select button.
Select {Alarm Out} Æ {PSet} (Preset) Æ {Preset Action} for the channel using the arrow
keys and the Menu button.
Assign a Preset for each event.
Select the OK button to save. Otherwise, select the cancel button and press the [SELECT]
button to cancel.
[Figure 5-4. Preset Action Setting Window]
To set all channels to the same value at the same time, go to the top of the {Preset} column
and press the [Select] button.
Preset can be set to 1 ~ 8.
(3) Email
When an alarm or an event occurs, emails will be sent to the specified email address.
Select {Alarm Out} Æ {Mail} for the channel using the arrow keys and the Select button.
On the selection window, select event types and decide whether to use the email function or
not using the arrow keys and the Select button.
It is available to set up Email Service Ж Ж
(4) Relay
In case an alarm or an event occurs, all external alarm devices connected to the relay port will be
triggered.
Select {Alarm Out} {Relay} for the channel using the arrow keys and the Select button.
On the selection window, select the event type and decide whether to use the Relay function
or not using the arrow keys and the Select button.
Select {Alarm Out} {Relay} {Relay Type} for the channel using the arrow keys and the