Rugged Cams H.4 - Manual (Page 20)

Chapter 4. System Operation
3-3 Starting and Exiting the System
3-3-1 Starting the System
With the power connected to the DVR, The system will boot after pressing power button
After the system boots, images of all connected channels will be displayed.
3-3-2 Exiting the System
The default password for the local administrator is “00000.”
To change the password, select {Main Setup} Æ {System} Æ {Local
Administrator’s Password} .
Press the Menu button
Select the Exiting the System among the live menu.
In the password input screen, enter a system administrator password using the numeric
buttons and the arrow keys.
After authentication is completed, the system will be powered off in 15 seconds.
3-4 Monitoring
After the system boots, images will be displayed on a screen divided into 4 sub-screens mode. The
screen can be divided into 1, 4 sub-screens mode. Auto-sequencing is possible in 1 sub-screen
mode.
3-4-1 Screen Division and Automatic Screen Conversion
1 sub-screen (4 groups)
Use the 1 sub-screen button.
4 Sub-Screens
(1 groups)
1 2
3 4
Use the 4 Sub-Screen button.
The user can view an image on full screen by double-clicking the 4 Sub-Screen mode.
Double-click any part of the screen to return to the previous mode.