Rugged Cams H.4 - Manual (Page 66)

Connect the storage device with an upgrade file stored in the USB 2.0 port at the back.
Select {Upgrade} using the arrow keys and the Select button.
The upgrade file list stored in the selected device and simple version information for the
selected file are then displayed.
After selecting the file to be upgr aded, press the [SELECT] button.
Downgrading to a previous version is not supported.
The upgrade information window will then appear within 15 seconds.
Read the information and select {Yes} to start the upgrade gradually. Select {No} to return to
{System}
mode.
After the update is completed, the system will be rebooted.
The system will automatically start. Upgrade is then completed.
Select {Live Menu} Æ {Status} Æ {Product Information} Æ {Software Version}.
10) Reset All Setting
Select {Reset All Setting} using the arrow keys and the Select button.
When prompted whether to reset all setting, select Yes.
Note that all setting data will be reset.
The factory setting will be restored.
11) PTZ Home Position Time
This feature enables Preset1 to be executed automatically for the corresponding PTZ if no control
occurs for a specific amount of time after controlling the PTZ. Preset 1 replaces the Home Position
feature.
Select {PTZ Home Position Time} using the arrow keys and the Select button.
On the selection window, select the time using the arrow keys and the Select button.
12) PTZ Control Type
Select {PTZ Control Type} using the arrow keys and the Select button.
On the selection window, select the type using the arrow keys and the Select button.
A-Type This is a method wherein the corresponding command
(Pan/Tilt/Zoom/Focus) is sent in case of key input; a Stop command
is not sent pending another key input.
B-Type In case of key input, the corresponding command
(Pan/Tilt/Zoom/Focus) is sent. In the absence of another key input
within a specific time (about 0.5 second), the Stop command is sent.