Rugged Cams H.4 - Manual (Page 56)

Select {Event} Æ {Post} for the channel using the arrow keys and the Select button.
On the selection window, select the time value using the arrow keys and the Select button.
Time is set in seconds. Whenever an event is detected, recording will be done for the set time.
To set all channels to the same value at the same time, go to the top of the {Post} column and
press the [SELECT] button.
4) Alarm Out
This feature is used to generate alarms through the buzzer, PTZ Preset, mail and relay in case of
an event.
(1) Buzzer
This feature is used to run the buzzer in the product in case of an event.
Select {Alarm Out} {Buz.} (Buzzer) for the channel using the arrow keys and the Select
button.
On the selection window, select the event subject to buzzer operation (e.g., movement,
sensor, sound) using the arrow keys and the Select button and decide whether to activate or
deactivate the buzzer. Multiple time zones may be selected.