Rugged Cams H.4 - Manual (Page 46)

3) Focus Control
To shift to focus control mode, press the PTZ button again in PTZ Zoom In/Out mode.
Use the arrow (▲▼) buttons.
To change the screen split in focus control mode, select {Menu} Æ {Display Setting} and
shift to screen split mode.
4) Preset
Used to store the horizontal/vertical/extended/focus settings of the PTZ camera
To shift to Preset mode, press the Select button in Horizontal/Vertical PTZ Rotation, Zoom
In/Out, or Focus Control mode.
In PTZ Preset mode, select the Preset mode using the arrow keys and the Select button.
Numbers between 1 and 8 can be assigned.
After presetting is completed, the set numbers are displayed in blue, and the PTZ setting
status with the set number will be stored.
5) Using the Preset Function
In Vertical/Horizontal PTZ rotation, Zoom In/Out, and Focus Control modes, use the numeric
buttons.
6) Using the Tour feature
For more information on setting the Tour feature, select {Additional Setup} -> {PTZ Setup} ->
{Tour} .
After the Tour is set, No. 9 or No. 0 will be displayed in blue.
In Vertical/Horizontal PTZ Rotation, Zoom In/Out, or Focus Control mode, use the numeric
button 9 or 0.
To disable the Tour feature, press the currently enabled Tour numbers (9 and 0).
Tour 1 Set to 9.
Tour 2 Set to 0.
7) Controlling the PTZ Speed
Adjust the PTZ speed using the Up/Down button.
Speed is set between 1 ~ maximum speed.
The maximum speed differs for each PTZ model.
4-13 Digital Zoom