Precision Digital PD6080 - Manual (Page 90)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
90
Analog Output Source Programming (aoutpr)
The 4-20 mA analog outputs can be programmed for source of data, overrange and underrange, absolute
maximum and minimum output, and communications break values. They can also be recalibrated.
Underrange
Max
Min
All enabled
PVs 1-16 & all
Set Points 1-8
To
RUN
Mode
• To calibrate the analog outputs, follow the graphic above.
• The overrange and underrange values are the values that will be output when the display shows an
overrange or underrange condition. This setting is common to all analog outputs.
• The maximum and minimum values are the absolute limits for the 4-20 mA output. This setting is
common to all analog outputs.
• The communications break value determines the mA output when a Slave fails to reply to a command
within the Response time.