Precision Digital PD6080 - Manual (Page 66)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
66
Scaling the 4-20 mA Analog Output (Aout)
The 4-20 mA analog outputs can be scaled to provide a 4-20 mA signal for any display range selected.
The Analog Outputs can be mapped to PVs or Math Channels. To select the channel and source
assignments the analog outputs are assigned to, see Analog Output Source Programming on page 90.
No equipment is needed to scale the analog outputs; simply program the display values to the
corresponding mA output signal.
The Analog Output menu is used to program the 4-20 mA outputs based on display values.
There are three analog outputs available. These only display when they are enabled. See graphic below.
* *
* If Installed
Notes: Changes to the settings are saved to memory only after pressing ENTER. Changes made to
settings prior to pressing ENTER are not saved. Once ENTER is pressed, the display moves to the next
menu.