Precision Digital PD6080 - Manual (Page 26)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
26
Display Functions & Messages
The following table shows the main menu functions and messages in the order they appear in the menu.
Display Parameter Action/Setting Description
mode Mode Enter Mode menu
master Master Enter Master Mode
Pv.nbr PV Number Select PV
Pv 1 PV Select PV 1-16
enable Enable Enable PV
disabl Disable Disable PV
Slav.Id Slave ID Enter the unique Slave ID for each PV
FunCod Function Code Enter the Function Code for each PV
Reg.nbr Register Number Enter the Register Number for each PV
data Data Type Enter the Data Type for each PV
float Floating Point Data Type Floating Point Data Type. Select Floating Point as the data type to be
read from the slave device.
short Short Integer Data Type Short Integer Data Type. Select Short Integer as the data type to be
read from the slave device.
long Long Integer Data Type Long Integer Data Type. Select Long Integer as the data type to be
read from the slave device.
binary Binary Binary Data format. Select Binary format for Short or Long integers.
bcd BCD BCD Data format. Select BCD format for Short or Long integers.
signed Signed Signed Data. Select Signed Binary format for Short or Long integers.
unsigd Unsigned Unsigned Data. Select Unsigned Binary format for Short or Long
integers.
1234 Byte Order Select big-endian byte order.
4321 Byte Order Select little-endian byte order.
2413 Byte Order Select byte-swapped big-endian byte order. Not available for Short
integer.
3412 Byte Order Select byte-swapped little-endian byte order. Not available for Short
integer.
t-poll Polling Time Enter Polling Time (the time between read commands). In other words,
how often the display is updated in Master mode.
t-resp Response Time Enter the time allowed for a slave device to respond to a command.
snooper Snooper Enter Snooper Mode
Pv.nbr PV Number Select PV
Pv 1 PV Select PV 1-16
enable Enable Enable PV
disabl Disable Disable PV
Slav.Id Slave ID Enter the unique Slave ID of the device to be polled by Master
FunCod Function Code Enter the Function Code for each PV
Fun 03 Function Code 03 Use Function Code 03 to read slave device
Fun 04 Function Code 04 Use Function Code 04 to read slave device
Fun 65 Function Code 65 Use Function Code 65 to read slave device
Reg.nbr Register Number Enter the Register Number for each PV
5 dig
6 dig Register Number Digits Select either 5 (x0001-x9999) or 6 (x00001-x65536) digits for the
Register Number by pressing the Right Arrow in Register Number
menu.
data Data Type Enter the Data Type for each PV