Scanner instruction manual, Setting up the displays ( dsplay setup ), Top display parameters ( top dsplay ) – Precision Digital PD6080 User Manual
Page 41: Bottom display parameters ( botomdsplay ), Display intensity ( d-inty ), Display parameter setting description
PD6080/PD6081 Super Snooper Modbus
Scanner Instruction Manual
41
Setting Up the Displays (dsplay setup)
Top Display Parameters (top dsplay)
The top display (top) can be programmed to display any of the following:
Display
Parameter
Setting Description
D pv
Display PV
Display PVs 1-16
D Ch-C
Display C Channel
Display Math Channels C1-C4
Pv.unit
Display PV & Units
Display PV & Units
Tg.pvn
Display Tag, PV Number
Display Tag & PV Number selected
Tg.pvn.u
Display Tag, PV# & Units
Display Tag, PV Number selected, & Units
C.unit
Display C & Units
Display C1-C4 & Units
Tg. C. u
Display Tag, C, & Units
Display Tag, C1-C4 & Units
Dset 1
Display Set Points 1-8
Display Set Points 1-8
Hi-pv
Display Max PV 1-16
Display Maximum value for each enabled PV1-16
Lo-pv
Display Min PV 1-16
Display Minimum value for each enabled PV1-16
Hi-C
Display Max Ch C1-C4
Display Maximum for math channels C1-C4
Lo-C
Display Min Ch C1-C4
Display Minimum for math channels C1-C4
Bottom Display Parameters (botomdsplay)
The bottom display (botom) can be programmed to display any of the following:
Display
Parameter
Setting Description
D pv
Display PV
Display PVs 1-16
D Ch-C
Display C Channel
Display Math Channels C1-C4
Pv.unit
Display PV & Units
Display PV & Units
Tg.pvn
Display Tag, PV Number
Display Tag & PV Number selected
Tg.pvn.u
Display Tag, PV# & Units
Display Tag, PV Number selected, & Units
C.unit
Display C & Units
Display C1-C4 & Units
Tg. C. u
Display Tag, C, & Units
Display Tag, C1-C4 & Units
Dset 1
Display Set Points 1-8
Display Set Points 1-8
Hi-pv
Display Max PV 1-16
Display Maximum value for each enabled PV1-16
Lo-pv
Display Min PV 1-16
Display Minimum value for each enabled PV1-16
Hi-C
Display Max Ch C1-C4
Display Maximum for math channels C1-C4
Lo-C
Display Min Ch C1-C4
Display Minimum for math channels C1-C4
D tag
Display Tag
Display Tag (Bottom display only)
D tag.u
Display Tag & Units
Display Tag & Units (Bottom display only)
D off
Display off
Display Off (Bottom display only)
Note: Toggling displays use the Scan Time for the value and 2 seconds for Tag and Units.
Display Intensity (d-IntY)
The scanner has eight display intensity levels to give the best performance under various lighting
conditions. Select intensity 8 for outdoor applications. The default intensity setting is 8.