Precision Digital PD6080 - Manual (Page 27)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
27
Display Parameter Action/Setting Description
float Floating Point Data Type Floating Point Data Type. Select Floating Point as the data type to be
read from the slave device.
short Short Integer Data Type Short Integer Data Type. Select Short Integer as the data type to be
read from the slave device.
long Long Integer Data Type Long Integer Data Type. Select Long Integer as the data type to be
read from the slave device.
binary Binary Binary Data. Select Binary format for Short or Long integers.
bcd BCD BCD Data. Select BCD format for Short or Long integers.
signed Signed Signed Data. Select Signed Binary format for Short or Long integers.
unsigd Unsigned Unsigned Data. Select Unsigned Binary format for Short or Long
integers.
1234 Byte Order Select big-endian byte order.
4321 Byte Order Select little-endian byte order.
2413 Byte Order Select byte-swapped big-endian byte order. Not available for Short.
3412 Byte Order Select byte-swapped little-endian byte order. Not available for Short.
t-resp Response Time Enter the time allowed for a slave device to respond to a command.
slave Slave Enter Slave Mode
data Data Type Enter the Data Type for each PV
float Floating Point Data Type Floating Point Data Type. Select Floating Point as the data type to be
read from the slave device.
short Short Integer Data Type Short Integer Data Type. Select Short Integer as the data type to be
read from the slave device.
long Long Integer Data Type Long Integer Data Type. Select Long Integer as the data type to be
read from the slave device.
binary Binary Binary Data. Select Binary format for Short or Long integers.
bcd BCD BCD Data. Select BCD format for Short or Long integers.
signed Signed Signed Data. Select Signed Binary format for Short or Long integers.
unsigd Unsigned Unsigned Data. Select Unsigned Binary format for Short or Long
integers.
1234 Byte Order Select big-endian byte order.
4321 Byte Order Select little-endian byte order.
2413 Byte Order Select byte-swapped big-endian byte order. Not available for Short
integer.
3412 Byte Order Select byte-swapped little-endian byte order. Not available for Short
integer.
t-resp Response Time Enter the time allowed for a slave device to respond to a command.
setup Setup Enter Setup menu
pv Process Variable Enter PV Setup menu
Pv 1 PV Select PV 1-16
tag Tag Tag
units Units Units
formt Format Format (Decimal, Eighths, or Sixteenths of an Inch)
dec Decimal Decimal Format
Ft In 8 Eighths Eighth Inch Format
Ft In 16 Sixteenths Sixteenth Inch Format
Dec.Pt Decimal Point Decimal Point menu
Disp.dp Display Decimal Point Set the decimal point position for the display. This is independent from
float decimal point.